Wuxi Hengnuo Chemical Equipment Manufacturing Co.,Ltd.
Home > Exhibition > Content
Agitated thin film evaporator using the specific steps of the process
- Sep 15, 2017 -

Since the agitated thin film evaporator is also a typical thin film evaporation device, its operation flow will also be summarized as two aspects, on the one hand, a reasonable set of parameters for the agitated thin film evaporator; and on the other hand, Cleaning equipment, these two are agitated thin film evaporator should play the basis for the effectiveness of the conditions.

Before starting to use the agitated thin film evaporator, the first thing to do is to clean the work, but do not forget to check the line before cleaning the equipment, see if it is smooth; at the same time the key all closed, Under the agitated thin film evaporator cleaning.

After the agitated thin film evaporator has been cleaned, it is necessary to pour hot water into its stainless steel tank so that the water can be opened by gravity into the tank and the temperature instrument can be opened because the temperature has an important effect on the evaporation effect; After the evaporator's feed glass slot is filled, the vacuum pump is closed.

The next thing to do is to open the cold water feed tank of the agitated thin film evaporator and then adjust the water flow at a rate of 8.5L per minute. At the same time, the vacuum pump is opened and the system pressure is adjusted for the vapor pressure. The evaporation effect of the agitated thin film evaporator is also related to the level of the system pressure; in order to match the pressure, but also on the evaporation rate of the appropriate adjustments.

After the end of the entire operation of the agitated thin film evaporator, the steam valve needs to be switched off and then the system pressure is released and the corresponding valve is closed, and the fixed vapor pressure is maintained at a constant time The extension gradually changes.


If you are interested in our products, please contact us!

Wuxi Hengnuo Chemical Equipment Manufacturing Co.,Ltd.

Contact:XiaoPanrong

Tel: +86-510-85181518 

Fax: +86-510-85190901

Mob: +86-13901511552 

E-mail: sales@prhgsb.com 

Website: http://www.reactiontank.com