Wuxi Hengnuo Chemical Equipment Manufacturing Co.,Ltd.
Home > Exhibition > Content
Maintenance and troubleshooting of stainless steel electric heating reactor
- Apr 22, 2017 -

Electric heating reactor is composed of the kettle body, kettle cover, jacket, stirrer, transmission device, shaft seal device, support and other components, and with electric heating rods and thermometers, pressure table. Materials and openings can be developed according to the user's process requirements. Stirring forms are: anchor type, paddle type, turbine type, propulsion type and frame type. The electric heating reactor has the characteristics of rapid heating, high temperature resistance, corrosion resistance, hygienic, no environmental pollution, not need to automatic boiler heating, easy to use and so on. It is widely used in chemical industry, medicine, food, dyestuff, rubber,petroleum and other industries. To complete the vulcanization, nitrification, hydrogenation, alkylation, polymerization, condensation and other processes,is to participate in the reaction of the material as a prerequisite for the mixture, for heating, cooling, and liquid extraction and gas absorption and other physical changes are required to use the mixing device get good results, and customers can design, processing of outer tube reactor. The electric heating reactor material is made of 304 stainless steel.

Stainless steel electric heating reactor

Maintenance of electric heating reactor

1. Electric heating reactor should be strictly in accordance with the product nameplate marked on the working pressure and working temperature operation to avoid danger.

2. Electric heating reactor strictly comply with the product use manual on the cooling, oil and other aspects of the provisions of good equipment maintenance and maintenance.

3. Electric heating reactor used in all valves when slowly rotating the stem (needle), pressing the sealing surface, to achieve sealing effect. In the closed time can not be too much force, so as not to damage the sealing surface.

4. Electric heating reactor electrical control instrument should be operated by the specific person, And set the overload protection facilities as provisions.

Trouble shooting of electric heating reactor

1.Sealing surface at the time of leakage will re-tighten the screws, re-grinding polishing sealing surface.

2. Valve leakage occurs when the maintenance, replacement of the valve stem (needle), valve port.

3 external magnetic steel rotation, the internal magnetic steel is not rotation, the motor current is reduced to notify the supplier, re replacement of internal magnetic steel.

4. Magnetic coupling actuator within the friction noise when you contact the supplier, replace the bearings, bushings.

If you are interested in our products, please contact us!

Wuxi Hengnuo Chemical Equipment Manufacturing Co.,Ltd.

Tel: +86-510-85181518

Fax: +86-510-85190901

Mob: +86-13901511552

E-mail: sales@prhgsb.com

Website: http://www.reactiontank.com