Wuxi Hengnuo Chemical Equipment Manufacturing Co.,Ltd.
Home > News > Content
The Eight Basic Structures And Principles Of Heat Exchanger
- Jun 30, 2017 -

The eight basic structures and principles of Heat Exchanger
1, kettle body, heat exchanger kettle lid made of 1Cr18Ni9Ti stainless steel processing, heat exchanger kettle body through the thread and flange connection, the kettle cover is the body plate cover, both by the circumferential uniform of the main bolt, nut tightening connection.
2, the main seal of the autoclave with A-type double-line seal, the rest of the sealing point are used circular surface and the plane, the arc surface and the circular surface of the line in contact with the seal, the heat exchanger depends on the contact surface of high precision and Finish, to achieve a good sealing effect.
3, the heat exchanger kettle body is equipped with barrel-type silicon carbide furnace core, electric furnace wire wear in the furnace core, Heat Exchanger the end of the shell from the shell side of the lower piercing, through the wiring stud, rubber cable and the controller connected.
4, heat exchanger kettle cover with pressure gauge, blasting membrane safety devices, vapor-liquid valve, temperature sensors, etc., Heat Exchanger to keep abreast of the reaction within the kettle, adjust the proportion of the media within the reactor and ensure safe operation.
5, the coupling is mainly by a strong magnetic force of a pair of internal and external magnetic ring composition, the middle of the pressure of the spacer. The heat exchanger stirrer is driven by a servomotor through a coupling. Control the speed of the servo motor, you can achieve the purpose of controlling the stirring speed.
6, the upper part of the sleeve with the speed coil, even into one of the mixer and the inner ring rotation, the speed coil will produce induced electromotive force, the potential and the stirring speed corresponding to the potential delivered to the tachometer, can show the mixing Rotating speed.
7, Heat Exchanger magnetic coupling and heat exchanger between the kettle cover with a cooling water jacket, when the operating temperature should be higher when the cooling water, and the magnet temperature is too high and demagnetization.
8, bearing with 1Cr18Ni9Ti stainless steel bearings or high-strength electric graphite, wear resistance, and long maintenance cycle.
It is widely used in petroleum, chemical industry, rubber, pesticide, dyestuff, medicine, food, chemical industry and so on. It is widely used in many fields such as oil, chemical industry, rubber, It is necessary to complete the process of vulcanization, Heat Exchanger nitrification, hydrogenation, alkylation, polymerization and condensation. It is necessary to use the mixing device for the physical mixing process such as heating, cooling, liquid extraction and gas absorption. In order to get a good effect, and customers can design, processing outside the coil heat exchanger.